Intellinet 524759 Bedienungsanleitung PDF herunterladen (Seite 45)

TROUBLESHOOTING

6 troubleshootiNG

If the Wireless Projector Server doesn’t function properly, refer to the

possible solutions below. In most cases, you can solve the problem

yourself.

Can’t connect to the Wireless Projector Server?

• Check the LEDs on the front panel. If the Power LED doesn’t light,

 checktheconnectionofthepoweradapterandconrmtheelectrical

outlet it’s connected to has power.

• If the Ready LED doesn’t light within 2 minutes of your turning on the

projector server, ask your INTELLINET NETWORK SOLUTIONS

dealer for help.

• Check the network connection.

• Make sure you connected to the correct IP address.

• If you’re using a wireless network, make sure you connected to the

correct SSID.

• If you’re using a wireless network, check the WEP / WPA password.

The remote control doesn’t work?

• Replace the battery (CR-2032 lithium).

• Make sure that you’re pointing the IR transmitter (located at the top of

remote control) directly at the front panel of the projector server and

that the IR receiver on the front panel isn’t blocked.

• RemoveorturnoffanystrongoruorescentlightsourceneartheIR

transmitter and receiver.

• Make sure the distance between the IR transmitter and the receiver

is no greater than 7 meters (approx. 23 feet).

Nothing displays on the projector server’s display?

• Make sure the Blackout function isn’t engaged.

• Check the connection between the video display and the projector.

• If the video display you’re using supports more than one video mode

or source, make sure you’ve selected the correct one.

• Make sure you’ve selected the correct video output type (HDMI or

VGA).

• Make sure the video display you’re using supports the video output

mode you’ve selected (in VGA mode).

• Make sure the video display is switched on.

1 2 ... 40 41 42 43 44 45 46 47 48 49

Keine Kommentare

Intellinet 524759 Bedienungsanleitung Seite 45