Intellinet 524759 Bedienungsanleitung PDF herunterladen (Seite 33)

CONFIGURATION

Fragment Threshold: Set the fragment threshold of the wireless radio.

RTS Threshold: Set the RTS threshold of the wireless radio.

Beacon Interval: Set the beacon interval of the wireless radio.

DTIM Period: Set the DTIM period of the wireless radio.

Data Rate: Select the wireless data transfer rate. Since most wireless

devices will negotiate with each other and pick a proper data transfer

rate automatically, it’s not necessary to change this value unless you

 knowwhatwillhappenaftermodication.

N Data Rate: Same as above, but only for 802.11n clients.

Channel Width: Select the channel width of the wireless radio.

Preamble Type: Select the type of preamble of the wireless radio.

Broadcast ESSID: Decide whether or not the projector server will

broadcast its own ESSID. You can hide the ESSID (set the option to

“Disable”) so only those who know it can connect.

CTS Protect: Enabling this setting will reduce the likelihood of radio

signal collisions between 802.11b and 802.11g wireless access points.

It’s recommended that this option be set to either “Auto” or “Always”;

however, “None” will have no affect on the projector server’s operation.

Tx Power: Select the output power of the wireless radio. Unless you’re

using the projector server in a very big space, you may not need to

set the output power to 100%. Limiting the output power will enhance

security (malicious/unknown users outside the signal range won’t be

able to reach your Wireless Projector Server).

WMM: This Wi-Fi MultiMedia option will enhance the data transfer

performance of multimedia content when it’s being transferred over a

wireless network. If you don’t know what it is or aren’t sure if you need

it, it’s safe to set this option to “Enable” even though the default is

“Disable.”

Click “Apply” (see Section 5.3).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 48 49

Keine Kommentare

Intellinet 524759 Bedienungsanleitung Seite 33