37
CONFIGURATION
characters(0-9,a-zandA-Z)ifyouselect“ASCII”;ifyouselect“Hex,”
you can use characters 0-9, a-f and A-F. You must enter at least one
encryption key here; if you enter multiple WEP keys, they should all be
different.
Enable 802.1x Authentication: Select to enable the function.
RADIUS Server IP Address: Enter the IP address of the RADIUS
authentication server.
RADIUS Server Port: Enter the port number of the RADIUS server.
RADIUS Server Password: Enter the password of the RADIUS server.
Click “Apply” (see Section 5.3).
5.5.3.3 eNcryPtioN: WPa Pre-shared key
When Encryption is set to “WPA pre-shared key,” the screen below will
display,requiringthatyoullintheeldsshown.
WPA Unicast Cipher Suite: Select any of the three options — “WPA
(TKIP),” “WPA2 (AES)” or “WPA2 Mixed” — as long as it’s supported.
Pre-shared Key Format: Select “Passphrase” (8–63 alphanumerical
characters) or “Hex” (64 characters of 0-9 and a-f).
Pre-shared Key: Enter your key. NOTE: For security reasons, don’t use
words found in a dictionary.
Click “Apply” (see Section 5.3).
Kommentare zu diesen Handbüchern