Intellinet 509060 Bedienungsanleitung PDF herunterladen (Seite 57)

You can congure the print server to automatically get an IP address from the

DHCP server, or to manually specify a static IP address. The print server also has

a built-in DHCP server. You can enable this DHCP server and let it manage the IP

process for you.

If you need the print server to automatically get an IP address from the DHCP

server, select “Enable Obtain TCP/IP Settings Automatically (Use DHCP/ BOOTP).”

You also can select “Disable Use the following TCP/IP Settings” to manually assign

an IP address, subnet mask and gateway for the print server.

You can enable/disable or set to “Auto” for the print server’s DHCP server. The

DHCP server is disabled by default. If the DHCP server is enabled or set to “Auto,”

you need to assign a range of IP addresses here. Fill in the “Start IP,” “Range,”

“DNS,” “Subnet Mask” and “Gateway” elds, and the print server will assign a

unique IP for each client. NOTE: When “Auto” is selected, the DHCP server of the

print server will be enabled only when there is no other DHCP server within the

network.

8.4.4 SMB

You can enable/disable the SMB protocol from here. If SMB is enabled, enter the

SMB group name to specify the SMB group that this print server belongs to. All

PCs should join the same group before they can use this print server using the

SMB protocol. Furthermore, you can enable the “Pass Job When Error Occurred’’

function and enter the time length (1-60 seconds) in the “Waiting time to pass job’’

eld.

WEB MANAGEMENT

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 75 76

Keine Kommentare

Intellinet 509060 Bedienungsanleitung Seite 57