Intellinet 509060 Bedienungsanleitung PDF herunterladen (Seite 38)

If you manually disable the wireless function, the print server’s wireless LAN will be

always disabled and Ethernet will be always enabled. You also can select “Auto” to

let the print server automatically decide to enable or disable the wireless function.

The print server only can work in ether Ethernet or wireless LAN mode: It cannot

work in both Ethernet and wireless LAN mode at the same time. When the print

server starts up, it will auto-detect if the LAN port is connected to an active network

by an Ethernet cable. If the print server is connected to an active network through

an Ethernet cable when starting up, the print server will run in Ethernet mode. If

the print server is not connected to an active network by Ethernet cable when

starting up, the print server will run in wireless LAN mode. The print server default

is in “Auto” mode.

Domain Country: The wireless channels vary from country to country. Generally,

the channels are from 1 to 11 in the U.S. and from 1 to 13 in Europe. The operating

channel will be set to the print server before importing. If you are in a different

locale, make sure that you have set the available channels according to your

location.

7.13 Wireless Conguration

If you want to use the print server through a wireless LAN, set up the print server

through Ethernet rst and make sure your wireless LAN setting is correct. After

setting the wireless LAN, unplug the Ethernet cable and restart the print server;

then you can start to use the print server through the wireless LAN. NOTE: If the

wireless conguration doesn’t work, plug the Ethernet cable in again, restart the

print server and congure the print server through Ethernet until the wireless LAN

settings are correct.

The default settings of the print server wireless function are as follows.

• Mode: Infrastructure

• SSID: Default

• Channel: 11

CONFIGURATION UTILITY

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 75 76

Keine Kommentare

Intellinet 509060 Bedienungsanleitung Seite 38