Intellinet 525497 Bedienungsanleitung PDF herunterladen (Seite 15)

4.1 Prepare your PC to configure the WLAN Broadband Router

For Windows 2000/ XP:

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will

appear.

2. Double-click the right mouse button on the Network and Dial-up Connections icon. Double-click the

Local Area Connection icon. The Local Area Connection window will appear. Click the Properties

button in the Local Area Connection window.

3. Check the installed list of Network Components. If TCP/IP is not installed, click the Add button to

install it; otherwise, go to Step 6.

4. Select Protocol in the Network Component Type dialog box and click the Add button.

5. Select TCP/IP in the Microsoft of Select Network Protocol dialog box, then click the OK button to

install the TCP/IP protocol. It may need the Microsoft Windows CD to complete the installation. Close

and go back to the Network dialog box after the TCP/IP installation.

6. Select TCP/IP and click the properties button in the Network dialog box.

7. Select Specify an IP address and type in values as per the following example.

 IP Address: 192.168.2.1 — any IP address within 192.168.2.1 to 192.168.2.254 is good to

connect the Wireless LAN Access Point. Don’t use 192.168.2.1.

 IP Subnet Mask: 255.255.255.0.

8. Click OK to complete the IP parameters setting.

For Windows Vista / 7:

1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will

appear.

2. Double-click the right mouse button on Network Connections. The Network Connections window

will appear. Double-click the Local Area Connection icon, and the User Account Control window is

shown. Right-click on the Continue button to set properties.

3. In the Local Area Connection Properties window, choose the Networking tab and click Internet

Protocol Version 4 (TCP/IPv4), then click on the Properties button.

4. Click on the General tab, select Specify an IP address and enter values per the following example.

 IP Address: 192.168.2.1 — any IP address within 192.168.2.1 to 192.168.2.254 is good to

connect the Wireless LAN Access Point. Don’t use 192.168.2.1.

 IP Subnet Mask: 255.255.255.0

5. Click OK to complete the IP parameters setting.

6. NOTE: Procedures for Windows 8 are similar.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 81 82

Keine Kommentare

Intellinet 525497 Bedienungsanleitung Seite 15