Intellinet Wireless G USB Adapter Bedienungsanleitung

880022..1111gg WWiirreelleessss LLAANN MMiinnii UUSSBB AAddaapptteerr User Manual Version: 2.0 (August

5 D. Click “Finish” to complete the installation. II. Install the USB Adapter A. Plug the USB Adapter into the USB port of your computer. B. The “

6 D. Click “Finish” to complete the installation.

7 III. Using the Configuration Utility To setup the USB adapter, double-click the icon in the system tray. For Windows XP, there is a “Windows Ze

8

9 3 Configuration Utility The Configuration Utility is a powerful application that helps you configure the 802.11g Wireless LAN Mini USB Adapter and

10 Parameter Description Mode Station – Set the USB adapter a wireless client. Access Point – Turns the USB adapter to function as a wireless AP.

11 Parameter Description Signal Strength This bar shows the signal strength level. The higher percentage shown in the bar, the more radio signal be

12 Parameter Description General Connection Setting Channel Select the number of the radio channel used for the networking. The channel setting o

13 Parameter Description Encryption AES – AES has been developed to ensure the highest degree of security and authenticity for digital in

14 Parameter Description Encryption Setting In the block, users setup WEP and WPA functions. Please refer to Section 3.3 for more description.

COPYRIGHT Copyright © 2004/2005 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed,

15 3.3.1 WEP Setting Parameter Description Key Length You may select the 64-bit, 128-bit or 256-bit to encrypt transmitted data. Larger key leng

16 3.3.2 WPA Setting The adapter can automatically detect the WPA setting of the AP which the adapter chooses to connect from the “Available Network

17 Parameter Description Connect Information It is the setting for WPA or WPA-PSK mode. Protocol This adapter supports two kind of protoc

18 3.4 Advanced Setting The “Advanced Setting” allows user to enable/disable country roaming, setup power consumption, fragmentation threshold and R

19 Parameter Description Fragementation Threshold The value defines the maximum size of packets, any packet size larger than the value will be frag

20 Parameter Description Network Adapter Display the product information of the USB Adapter. Connect Station List Display all the MAC Addresses

21 Parameter Description General Connection Setting Channel Select the number of the radio channel used by the AP. The wireless station

22 Parameter Description Fragement The value defines the maximum size of packets, any packet size larger than the value will be fragmented. If you

23 Parameter Description Filter Type Disable – Disable the MAC Address filter function. Accept – Only the wireless stations with the MAC Addresses

24 4 Troubleshooting This chapter provides solutions to problems usually encountered during the installation and operation of the adapter. 1. Wha

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital de

25 5. What is Infrastructure？ An integrated wireless and wireless and wired LAN is called an Infrastructure configuration. Infrastructure is applic

26 12. What is DSSS？What is FHSS？And what are their differences？ Frequency-hopping spread-spectrum (FHSS) uses a narrowband carrier that changes fre

R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN PARLIAMENT AND THE COUNCIL

CONTENTS 1 INTRODUCTION...1 1.1 FEATURES...

1 1 Introduction Thank you for purchasing the 802.11g Wireless LAN Mini USB Adapter. This USB Adapter is designed to comply with IEEE 802.11g Wirele

2 • Transmit Power: 16dBm (Typical) • Dimension: 9(H) x 27(W) x 87(D) • Temperature: 32~131°F (0 ~55°C) • Humidity: 0-95% (NonCondensing) • Certific

3 2 Installation Procedure Before you proceed with the installation, please notice following descriptions. Note1: Please do not install the USB ada

4 C. Click “Continue Anyway” to finish the installation.