Intellinet 524643 Bedienungsanleitung PDF herunterladen (Seite 4)

4

1 2 3 4 5 6 7 8

Reset Power

Selected

On Line

Shown here: 8-Port, Model 524629

Shown here: 16-Port, Model 524643

16 15 14 13

F/W

Upgrade

8 7 6 5

Console

DC 5V

INSTALLATION/SETUP

Front Panel

Selected LED — Lighted red indicates that the PC (or cascaded KVM switch) connected to the

corresponding rear-panel port (matching the numbered button beneath the LED) is selected.

Online LED — Lighted green indicates the corresponding PC (or cascaded switch) is ready

(connected but not selected).

Buttons — Press any button (1-8 for Model 524629, 1-16 for Model 524643) to select — or

switch to — the corresponding port/channel for operation. NOTE: See the Operation section

for hotkey and OSD alternatives to pressing a button if the front panel is out of reach or is

otherwise not easily accessible.

Reset — Press this recessed button (using a narrow/pointed object, such as a common pin)

to reset the system.

Power — Lighted green indicates the KVM Switch is powered on. NOTE: A 5 V DC, 2 A

external power adapter is included with this Rackmount KVM Switch.

Rear Panel

DC 5V — Plug the included external power adapter into this jack and connect to an A/C outlet.

Conrm that the Power LED lights on the front panel. CAUTION:

• Before connecting to the KVM Switch, all computers should be powered off; otherwise, the

switch system might not be properly set up.

• For computers with a Keyboard Power On function, rst unplug the power cords; otherwise,

the switch system might not be properly set up.

• For some older computers to work with this switch’s USB interface, the USB setting must be

enabled in BIOS. (Refer to the computer’s instructions as needed.)

• For computers running Windows 98, use only PS/2 connections, as the OS doesn’t support

USB installation on the initial system startup.

F/W Upgrade — This mini-USB port connects the KVM Switch to a USB port on whichever

system computer is running a rmware update utility. (See Firmware Upgrades in the

Operation section.)

Console — Connect the console keyboard and mouse (USB or PS/2) and monitor (HD15) to

the console ports, using the device icons as guides, if needed.

Ports 1-8 / 1-16 — Use the included 4-in-1 connection cable,

Model 505727 — plus however many additional cables and/or

extenders you need — to connect the KVM Switch port(s)

to your computer(s) or cascading KVM switches.

Intellinet 524643 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Intellinet 524643 Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für KVM-Schalter Intellinet 524643