Intellinet GuestGate HotSpot Gateway Bedienungsanleitung PDF herunterladen (Seite 9)

- 9 -

INSTALLATION of GuestGate

Recommended Setup

This setup method assumes that a DHCP Server such as a router is present in your network.

1. Connection to the Host Network

Connect standard RJ45 Network Cable to GuestGate’s HOST Port and to a RJ45 port on

your existing network (Ethernet Switch Port, Router Switch Port, etc.).

Turn on GuestGate and verify that the network connection is active (HOST LED must be lit

on GuestGate).

NOTE: The startup process takes up to 60 seconds (if no DHCP Server is present it may

take as long as 300 seconds).

2. Connection of Guests

Using standard RJ45 Network Cable you can now connect PCs, Notebooks, Ethernet

Switches, Hubs or Wireless Access Points to the Guest Ports of GuestGate.

Each Port has its own Status LED. Verify that the network connection is active on each port

you connect.

Rear View

12V DC power input

(only use power

adapter supplied

with product)

Guest Ports 1 – 4 for the

connection of LAN

switches, Access Points,

Desktop PCs and

Notebook computers

Host Port

Connect this to your

network, e.g., the

Reset Switch

Hold down for 5 seconds

to perform a reset of the

IP settings.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 40 41

Keine Kommentare

Intellinet GuestGate HotSpot Gateway Bedienungsanleitung Seite 9